|
|
Monitoring Hybrid Net Infrastructure
Janda, Martin ; Plchot, Oldřich (referee) ; Smrž, Pavel (advisor)
This bachelor thesis follows developement of automatic monitoring system of devices in hybrid network for SELF servis company. System's purpose is to check availability by ICMP packets and to watch values by SNMP protocol. In this text you'll find description of requirements analysis, design of the system and implementation. In the last chapter follows results from real use and ideas for further development.
|
|
|
Measuring system of photovoltaic panels efficiency
Hofman, Jiří ; Háze, Jiří (referee) ; Vaněk, Jiří (advisor)
This diploma thesis is focused on development and initial run of a measurement system whose aim is to measure photovoltaic panel efficiency. Experimental photovoltaic panel is installed outside the laboratory. Measurement system consists of the solar radiation measurement module (pyranometer), photovoltaic panel load module (panel power measurement) and panel climate measurement module. Data from measurement module is being captured via control computer for subsequent analysis of panel efficiency and climatic impacts on it.
|
|
|
Implementation of New Terminal Nodes to the Company and it’s Management
Lukeš, Pavel ; Šumbera, Tomáš (referee) ; Ondrák, Viktor (advisor)
This thesis deals with analysis of company’s MBG, spol. s r.o. problems, following with teoretical basis for these problems and in the end, it suggests the solutions. These problems are insufficient monitoring, any of used technology are old and absent of any information security management system. The first part is focused on a teoretical basis for the described problems, the second part will completely analyze all mentioned problems of a company. Final part will contain a solution for every company’s problem, based on theory and analysis with taking care about company’s demand too.
|
|
|
Bar Code Implemamtation to Production Process of Small Factory
Tihon, Karel ; Špinka, Jiří (referee) ; Starý, Jiří (advisor)
Target of my diploma thesis is barcode study and implementation to SMT assembly processes. This thesis contains two main parts. The first one is devoted to basic types of barcodes, reading technologies and industrial process mapping in PCB assembly. The second part is devoted to theoretical proposal and physical realization of system for materials flow monitoring. Barcode is contained in this system. Practical part of this thesis is tested in a company realizing contract manufacturing in PCB assembly - SMT and THT.
|
|
| |
|
|
Water Monitoring System for Buildings
Malík, Lukáš ; Franek, Lešek (referee) ; Bradáč, Zdeněk (advisor)
This bachelor thesis designes and realises microcontroller of regulated system for the state monitoring of water pipelines in a building. Demands for the system are listed in introduction. The main part of this work focuses on theory of monitoring systems, additionally it concentrates on design of conception and circuit boards for system. After this the production of electronic circuit boards is performed including the assembly of components onto the board. Controlling of the system is provided by Atmel microcontroller. Significant portion of this work is creation of complex program. At last but not least, functionality of the system is tested and assessed.
|
|
|
Active protection and monitoring device for wireless chargers
Volek, Radim ; Macho, Tomáš (referee) ; Petyovský, Petr (advisor)
This thesis deals with the design of monitoring device, which should serve for measurement and recording measured values of wireless charging device. The thesis further solves design of device protection method. Measuring instrument is equipped with several temperature sensors, which measures temperature in selected points of charging device and is also equipped with current sensor, which measures current from power source of charging device. Sensors are connected to development board FRDM-KL27Z with microcontroller MKL27Z64VLH4. Part of this work is also software which serves to evaluation of data obtained by the sensors.
|
|
|
Implementation of open source system for network monitoring
Scripnic, Dmitrii ; Sládok, Ondřej (referee) ; Grenar, David (advisor)
The bachelor thesis deals with network monitoring. In this work, a theoretical analysis of known monitoring systems was performed and their architecture, properties and work with these systems were also described. Subsequently, a comparative characteristic of all described systems was performed. At the beginning of the practical part, the installation and configuration of all monitoring systems and their evaluation was performed. The second part deals with the Zabbix monitoring system, where more emphasis was placed on monitoring IP service delays.
|
|
|
Planning Task Monitoring System
Maga, Martin ; Müller, Petr (referee) ; Letko, Zdeněk (advisor)
Task of this bachelor work is to create system for monitoring of statuses of planned jobs according to requirements defined by sponsor Red Hat. The main target is to understand what planning problem means, how can be defined, stored to system, how to initiate his planning and to monitor progress. Planning system has been split to the 2 parts. The first part is user interface build up based on technologies JavaServer Faces, RichFaces a Twitter Bootstrap which allows recording, beginning and put on hold of running jobs. The second part represents web service with combination of technology Enterprise JavaBeans which processes requirements for beginning/put on hold of planning run accomplishes with utilization of framework OptaPlanner, planning progress is being stored to MySQL database. Information about planning problems is obtained from this database and continuously is being displayed in user interface. For implementation both parts has been used platform Java Enterprise Edition 6 and has been deployed in application server JBoss. System has been tested on artificial planning problem N Queen and practical problems from Red Hat company cloud balancing and travelling tournament on platform UNIX via cloud service OpenShift by users.
|
|
|
Monitoring system for monitoring of laboratory processes
Bachmayer, Marek ; Odstrčilík, Jan (referee) ; Čmiel, Vratislav (advisor)
The presented work deals with the development of a monitoring system for monitoring the operation of the laboratory. The theoretical part of the work includes information on the safety of operation and work in biological laboratories, measured physical quantities and the principle of their measurement. The monitoring system is built on a compact ESP32-CAM camera and a WeMos D1 development board. The practical part consists of the design and implementation of a given system and the creation of a full-stack application for displaying live input from the laboratory for monitoring measured quantities in real time.
|
guest ::
